Amsco Gemini, Руководство оператора, Страница: 15 / 28

4-3
Operating Instructions Operator Manual 126360-627
» Lighthead/Suspension
Arm Assembly
•
Lighthead tilts within yoke a total of 300 degrees (±20 degrees).
•
Yoke rotates 360 degrees about yoke/suspension arm interface.
•
Suspension arm pivots up or down at suspension fork approximately 15
degrees up from horizontal or 50 degrees down. (Upper pivot limit may be
adjusted to up to a maximum of 45 degrees. See Maintenance Manual,
P-764322-447).
•
Each extension arm rotates 250 degrees about extension arm/vertical
suspension tube interface.
•
Each suspension fork rotates 360 degrees within its adaptor on extension
arm.
•
Light fixture moves freely on floor stand casters.
•
Vertical suspension tube/carriage shaft assembly rotates 360 degrees
within carriage.
•
Carriage moves smoothly from one end of track to other.
» Single and Dual
Ceiling Mounted Units
» Floor Stand Mounted
Units
» Track Mounted Units
Figure 4. LIGHTHEAD MOVEMENTS
Single and Dual Ceiling Mount
Floor Stand
Total Rotation
(within yoke)
300° ± 20°
360°
Rotation
15° Upward Pivot
50° Downward Pivot
250°
Rotation
360°
Rotation
Track Mounts
Verify Carriage Moves
Freely on Track
360°
Rotation
15° Upward Pivot
50° Downward Pivot
Total Rotation (within
yoke) 300° ± 20°
15° Upward Pivot
50° Downward Pivot
Rolls Freely
on Casters
Total Rotation (within yoke)
300° ± 20°
360°
Rotation