AMS EPIC SENSIT 3, Руководство по эксплуатации и обслуживанию

Страница: 7 / 52

L0190D
1
Congratulations on the purchase of your new AMS Epic Sensit 3
vendor. All Sensit 3 models are versatile, high-capacity vending
machines. AMS machines are designed, tested, and built to
provide years of reliable, low-maintenance service in an indoor
environment. A fully insulated cabinet, DEX data capability, and
flexible product configuration are just some of the many features
built into every AMS merchandiser.
SENSIT 3 SYSTEM
Your vendor is equipped with the Sensit 3 control system. The
Sensit 3 system is a patented vend-sensing system that detects
when products fall into the delivery bin. Basically, a plane of
infra-red light is created across the top of the delivery bin, and
the Sensit 3 system can detect when the light has been blocked
by a falling product. Using this technology, the vendor “knows”
when your customer gets the product. The Sensit 3 system has
several important benefits:
Guaranteed Delivery
If, during the vend, the product hangs up or an opening was
missed in loading, the helix can rotate several additional partial
revolutions to attempt to deliver the product. No more hitting or
shaking the vendor to get products that did not fall!
Instant Refund
If the customer does not receive a product, he can receive a full
refund by pressing the coin return button, or he can select
another product. No more refund requests!
Adjustable Helix Motion
With the Sensit 3 system, the helix can stop as soon as the
product falls, or when the helix returns to the home position.
(See
TRAY SETUP
on page 23 for more information.)
Additional Benefits:
a. Opening the delivery bin door will not affect the
Sensit 3 system. The sensors are located above
the delivery bin and will not be blocked by the bin
door. Product that falls while the door is open will
still pass through the beam.
b. Shining a light at a sensor will not allow vandals to
receive free product. Any tampering which changes
the precise amount of light normally received will be
treated as a successful vend, resulting in the vandal
losing his money.
c. Disabling or blocking the sensor will not allow
vandals to receive free product. The Sensit 3
system can over-ride blocked or malfunctioning
sensors and still vend.
MODEL IDENTIFICATION
When requesting service, replacement parts or technical
assistance please copy the information found on the vendor
Serial Plate. (See
Figure 1.1
below.) It is attached inside the
door near the upper right corner of the window and is visible from
the outside. The information contained on this plate is necessary
to determine what parts, kits, or maintenance should be applied
to your specific model.
Figure 1.1 Typical Serial Plate
Model Number Breakdown
SERIAL NUMBERING SYSTEM
Please See
Figure 1.1
above. The serial number is constructed
as follows:
On all AMS serial numbers, the first digit identifies where a
merchandiser was manufactured. Those merchandisers built in
the U.S. start with the number
1
. Those merchandisers built in
Mexico start with the number
2
.
The next two digits identify the year of manufacture. These
numbers are
17
(for 2017) and so forth.
1
INTRODUCTION
1-1711-0275
Built Year Month Sequence