Temposonics GmbH & Co.KG
Auf dem Schüffel 9
58513 Lüdenscheid
Germany
Tel. +49 2351/95 87-0
Fax. +49 2351/56 49 1
[email protected]
www.temposonics.com
Temposonics order number: __________________________
Serial number(s): __________________________________
Sensor type(s): ____________________________________________
Sensor length(s):___________________________________________
The sensor has been in contact with the following materials:
In the event of suspected penetration of substances into the sensor,
consult Temposonics to determine measures to be taken before
shipment.
Do not specify chemical formulas.
Please include safety data sheets of the substances, if applicable.
Short description of malfunction:
Corporate information
Company: ________________________________________________
Address: ________________________________________________
________________________________________________
Contact partner
Phone: ________________________________________________
Fax: ________________________________________________
Email: ________________________________________________
We hereby certify that the measuring equipment has been cleaned and neutralized.
Equipment handling is safe. Personnel exposure to health risks during transport and repair is excluded.
Date
Signature
Stamp
Safety declaration
Dear Customer,
If you return one or several sensors for checking or repair, we need you to sign a safety declaration. The purpose of this declaration is to ensure
that the returned items do not contain residues of harmful substances and/or that people handling these items will not be in danger.
12. Appendix II
C Y L I N D E R P O R T D E T A I L S
NOTES:
1.
Dimensions and tolerances based on ANSI Y14.5-1982.
2.
Temposonics
has extracted all pertinent information
from
MS33649 to generate this document.
3.
PD must be square with surface B within 0.005 FIM
across 2.250 dia minimum.
4.
PD
must be concentric with 2.250 dia within 0.030 FIM
and with 0.769 dia within 0.005 FIM.
5.
Surface texture ANSI B46.1-1978
6.
Use O-ring part number 560315 for correct sealing.
7. The thread design shall have sufficient threads to meet
strength requirements of material used.
8. Finish counter-bore shall be free from longitudinal and
spiral tool marks. Annular tool marks up to 32
microinches maximum will be permissible.
2.250 in. Minimum dia.
Specifies Surface B
120
0
30'
0.094 in. + 0.015
- 0.000
See Detail C
3/4-16 UNF-2B Thread
See Notes 3 And 4
32
in.
32
in.
125
in.
- B -
1.105 in.
Minimum
Full Thread
Depth
0.875 in. dia.
+ 0.015
- 0.000
0.769 in. dia.
+ 0.015
- 0.000
0.500 in.
dia.
0.005 in. dia., FIM
A
45
5
15
1
0.094 in. max.
0.008 in.
0.004 in.
0.125
in.
0.125
in.
3/4-16 UNF-2B Thread
R
0.813 in. dia.
0.002 in.
0.106 in.
0.008 in.
A
0.008 A
0.004 A
R0.015 in.
max.
Pitch
dia.
1.180 in.
Recommended
Minimum
Spotface
Diameter
See Note 1
0.866 in. dia.
Minimum
See Note 2
1.100 in.
See Note 4
1.250 in.
See Note 3
See Note 4
0.500 in. dia. Ref.
See Note 4
SAE - 8 Port Size
0.094 in. Ref.
See Note 8
0.030 in.
0.010 R
0.020 in. R
Maximum
45
5
PORT DETAIL (PD) FOR RH5-S:
PORT DETAIL (PD) FOR RH5- T:
NOTES:
1. If face of port is on a machined surface, dimensions
1.180 and 0.094 need not apply as long as R0.008/0.004
is maintained to avoid damage to the O-ring during
installation.
2. Measure perpendicularity to A at this diameter.
3. This dimension applies when tap drill cannot pass
through entire boss.
4. This dimension does not conform to SAE J1926/1.
Detail C
Temposonics
®
R-Series
V
POWERLINK
Operation Manual