Temposonics
®
R-Series
V
POWERLINK
Operation Manual
I 26 I
Multi-position measurement
The minimum distance between the magnets is 75 mm (3 in.).
RP5 with U-magnets
≥ 75 (≥ 3)
RP5 with magnet sliders
≥ 75 (≥ 3)
RP5 with block magnets
≥ 75 (≥ 3)
RH5 & RFV with ring magnets/U-magnets
≥ 75 (≥ 3)
RH5 & RFV with block magnets
≥ 75 (≥ 3)
RDV with ring magnets/U-magnets
≥ 75 (≥ 3)
RDV with block magnets
≥ 75 (≥ 3)
NOTICE
Use magnets of the same type for multi-position measurement.
Do not fall below the minimum distance between the magnets of
75 mm (3 in.) for multi-position measurement. Contact Temposonics
if you need a magnet distance < 75 mm (3 in.).
Fig. 40: Minimum distance for multi-position measurement