Temposonics
®
R-Series
V
POWERLINK
Operation Manual
I 28 I
For RDV POWERLINK sensors with ring magnet/U-magnet applies:
• Install the magnet so that the marking on the magnet faces the
sensor flange.
• The marking on the magnet points in the same direction as the
marking on the sensor flange.
Fig. 44: Magnet alignment of magnet slider for RDV POWERLINK with internal linearization
using the example of a "S" flange
Marking
Marking
NOTICE
The generated linearization might deviate from the linearity toleran-
ces regarding different environmental conditions. In addition, the
use of a different position magnet or more position magnets may
cause differences.
The internal linearization of the sensor is carried out under the
following conditions:
• Supply v24 VDC ± 0.5
• Operating time > 30 min
• No shock and no vibration
• Eccentricity of the position magnet to central axis
of the sensor < 0.1 mm