Amphenol Temposonics R V Analog RH5, Руководство по эксплуатации, Страница: 52 / 64

Temposonics
®
R-Series
V
POWERLINK
Operation Manual
I 52 I
Index Subindex Name Object type Attribute Data type Description
2201 Number of magnets
Variable rw Unsigned8 Setting the number of position magnets that are used simultaneously on
the measuring rod/profile
Note: If the number is greater than in the order code, an alarm is issued.
2202 Filter settings
Array
Setting the filter for the output value
0 Number of entries Variable ro Unsigned8
1 Filter type Variable rw Unsigned8 Setting the filter for the output value
• Bit value 0: No filter
• Bit value 1: FIR (finite impulse response filter)
• Bit value 2: IIR (infinite impulse response filter)
2 Filter window size Variable rw Unsigned8 Setting the number of position values for calculating the filter of the
output value
Possible values: 2…16
3 Velocity window size Variable rw Unsigned8 Setting the number of position values for determining the velocity of the
position magnet
Possible values: 2…16
2203 Position offsets Array Position offset for up to 30 magnets
0 Number of entries Variable ro Unsigned8
1…30 Position offset for magnets 1…30 Variable rw Integer32
2204 Lower limit for measurement
cycle time
Variable rw Unsigned32 Setting the lower limit for the cycle time. If no short cycle time is required,
reflections can be excluded with this parameter
2305 Sensor status
0 Number of entries Variable ro Unsigned8
1 Time since last update Variable ro Integer32 Age of the status data in ms
2 Status data version Variable ro Integer32 Version number
3 Operational time Variable ro Integer32
Total operational time of the sensor
4 Odometer Variable ro Integer32
Total distance travelled by the position magnet
5 Magnet cycles Variable ro Integer32 Total number of directional changes of the magnet
6 Minimum input voltage Variable ro Integer32 Minimum input voltage so far
7 Maximum input voltage Variable ro Integer32
Maximum input voltage so far
8 Minimum temperature Variable ro Integer32 Minimum temperature inside sensor electronics housing so far
9 Maximum temperature Variable ro Integer32 Maximum temperature inside sensor electronics housing so far
10 Current temperature Variable ro Integer32 Current temperature inside sensor electronics housing
11 Input voltage out of range Variable ro Integer32 Duration of exceeding or falling below the permissible power supply range
12 Temperature out of range Variable ro Integer32 Duration of exceeding or falling below the permissible operating
temperature range
6000 Operating parameters
rw Unsigned16
See table 5, page 54
6002 Total measuring range
in measuring units
Variable rw Unsigned32 If the scaling function is activated (see object 6000: Operating parameters),
this parameter includes the maximum value
6005 Linear encoder measuring
step settings
Array
1 Position step setting Variable rw Unsigned32 Resolution of the position output in nm
2 Speed step setting Variable rw Unsigned32
Resolution of the velocity output in 0.01 mm/s
Table 2: Index 2201, 2202, 2203, 2204, 2305, 6000, 6002, 6005
The parameters of the group “Device Specific Parameters”: