American Magnetics 430, Инструкции по установке, эксплуатации и обслуживанию

Страница: 144 / 254

128 R
EV
9
A
MERICAN
M
AGNETICS
, I
NC
. O
PERATION
: S
UMMARY OF
L
IMITS AND
D
EFAULT
S
ETTINGS
S
UMMARY OF
L
IMITS AND
D
EFAULT
S
ETTINGS
The table below provides a summary of the operational limits and the
default setting for all Model 430 Programmer parameters. If the user
attempts to enter a value outside of the limits, the Model 430
Programmer will beep once, indicate an error, and revert to the previous
setting.
References to the specifications table on page 7 indicate that the
absolute limit is determined by the specific configuration of the Model
430 Programmer purchased.
Summary of Model 430 Programmer Limits and Defaults
Model 430 Setting (Units) Absolute Limits Default Setting
a
Min Output Voltage (V)
0.000 to
-
20.000
-6.000
Max Output Voltage (V) 0.001 to +20.000 6.000
Min Output Current (A) see table on page 7 -125.000
Max Output Current (A) see table on page 7 125.000
V-V Mode Input Range (V) -
10.000 to +10.000
-10.000 to +10.000
Stability Setting (%) 0.0 to 100.0 0.0
Coil Constant (kG/A) 0.001 to 999.99999 1.0
Inductance (H) 0.0 to 1000.0
0.0
b
PSwitch Current (mA) 0.0 to 125.0 10.0
PSwitch Heated Time (sec)
5 to 120 20
PSwitch Cooled Time (sec)
5 to 3600 20
PSwitch Power Supply Ramp
Rate (A/sec) same as min and max ramp rates
(see table on page 7)
10
PSwitch Cooling Gain
0.0 to 100.0 0.0
Current Limit (A)
≥
Min Output Current and
≤
Max Output Current
80.000
Display Brightness (%) 25, 50, 75, 100 100
Voltage Limit (V)
≥
0.001 and
≤
Max Output Voltage
2.000
Ramp Rate (A/sec) see table on page 7 0.100
Target Current (A)
≤
Current Limit
5.000
a. Unless preset by factory.
b. A value of 0.0 means the inductance is not known.