Ambit U10C034 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 90

background image

83

pktcMtaDevErrorOidIndex

This is the index to

pktcMtaDevErrorOidsEntry.

This is an integer value and will start from the value

1 and be incremented for each error encountered in the configuration file. The indices need not
necessarily reflect the order of error occurrences in the configuration file.

pktcMtaDevErrorOid

This is the OID associated with the particular error. If the error was not due to an identifiable OID, then
this can be populated with impartial identifiers, in hexadecimal or numeric format.

pktcMtaDevErrorGiven

If the error was due to the value associated with the corresponding

pktcMtaDevErrorOid,

then this

contains the value of the OID as interpreted by the MTA in the configuration file provided. If the error
was not due to the value of an OID this must be set to an empty string. This is provided to eliminate
errors due to misrepresentation or misinterpretation of data.

pktcMtaDevErrorReason

This indicates the reason for the error, as per the MTA’s interpretation, in human readable form. For
example:
VALUE NOT IN RANGE
VALUE DOES NOT MATCH TYPE
UNSUPPORTED VALUE
LAST 4 BITS MUST BE SET TO ZERO
OUT OF MEMORY—CANNOT STORE
This MAY also contain vendor specific errors for vendor specific OIDs and any proprietary error
codes/messages which can help diagnose errors better, in a manner the vendor deems fit.

pktcMtaDevConfigFile

The URL of the TFTP/HTTP file for downloading provisioning and configuration parameters to this
device. Returns

NULL

if the server address is unknown. Supports both TFTP and HTTP.

pktcMtaDevSnmpEntity

The FQDN of the SNMP V3 entity of the Provisioning Server to which the MTA has to communicate
in order to receive the access method, location and the name of the Configuration file during MTA
provisioning. This would also be the entity which caters to the Endpoint provisioning needs of the
MTA and is the destination for all provisioning informs. It may be also used for post-provisioning
SNMP operations.

pktcMtaDevProvState

operational

(1)—the

device has completed loading and processing of initialization parameters.

waitingForSnmpSetInfo

(2)—the

device is waiting on configuration file download access information.

waitingForTftpAddrResponse(3)—

a

DNS request has been transmitted and no reply has yet been

received.

waitingForConfigFile(4)—

a

TFTP request has been transmitted and no reply has yet been received or

a download is in progress.

pktcMtaDevServerDhcp1

The IP address of the primary DHCP server which would cater to the MTA during its provisioning.
Contains

255.255.255.255

if there was no preference given with respect to the DHCP servers for MTA

provisioning.

pktcMtaDevServerDhcp2

The IP address of the Secondary DHCP server which could cater to the MTA during its provisioning.
Contains

0.0.0.0

if there is no specific secondary DHCP server to be considered during MTA

provisioning.

pktcMtaDevTimeServer

IP address of the Time Server from which to obtain the time. Contains

0.0.0.0

if the Time Protocol is

not used for time synchronization.

«
...
81
82
83
84
85
...
»

Содержание U10C034



























































































Отзывы:

Нет отзывов

Похожие инструкции для U10C034

Бренд: Hama Страницы: 56

FlashPen My Disa USB Data Safe

Бренд: Hama Страницы: 14

Бренд: Hama Страницы: 9

Nighthawk R7100LG

Бренд: NETGEAR Страницы: 179

Бренд: Planet Страницы: 36

Microwave link BT Series

Бренд: Summit Страницы: 8

Бренд: NetComm Страницы: 20

Бренд: ADC Страницы: 9

Бренд: Dynex Страницы: 2

Бренд: USR IOT Страницы: 37

USR-GPRS232-730

Бренд: USR IOT Страницы: 45

Бренд: USR IOT Страницы: 66

Hotwire 6310 MVL

Бренд: Paradyne Страницы: 17

Бренд: Broadxent Страницы: 40

Verizon LT1000 2G

Бренд: Connected IO Страницы: 6

Бренд: NETGEAR Страницы: 2

Бренд: NETGEAR Страницы: 7

Бренд: NETGEAR Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды