background image

 

MN-37010 (Rev. 8) 03/18 • Arby’s 300-TH/III Touch

 • 

20

Operation

General Holding Guidelines

Chefs, cooks and other specialized food service personnel 

employ varied methods of cooking. Proper holding 

temperatures for a specific food product must be based 

on the moisture content of the product, product density, 

volume, and proper serving temperatures. Safe holding 

temperatures must also be correlated with palatability 

in determining the length of holding time for a specific 

product.

Halo Heat maintains the maximum amount of product 

moisture content without the addition of water, water 

vapor, or steam. Maintaining maximum natural product 

moisture preserves the natural flavor of the product and 

provides a more genuine taste. In addition to product 

moisture retention, the gentle properties of Halo Heat 

maintain a consistent temperature throughout the cabinet 

without the necessity of a heat distribution fan, thereby 

preventing further moisture loss due to evaporation or 

dehydration.

When product is removed from a high temperature 

cooking environment for immediate transfer into 

equipment with the lower temperature required for hot 

food holding, condensation can form on the outside of 

the product and on the inside of plastic containers used in 

self-service applications. Allowing the product to release 

the initial steam and heat produced by high temperature 

cooking can alleviate this condition. To preserve the safety 

and quality of freshly cooked foods, however, a maximum 

of 1 to 2 minutes must be the only time period allowed for 

the initial heat to be released from the product.

Most Halo Heat Holding Equipment is provided with a 

thermostat control between 60° and 200°F (16° to 93°C). If 

the unit is equipped with vents, close the vents for moist 

holding and open the vents for crisp holding.

Holding Temperature Range

Meat

Fahrenheit

Celsius

Beef Roast — Rare

130°F

54°C

Beef Roast — Med/Well Done

155°F

68°C

Beef Brisket

160°F–175°F

71°C–79°C

Corn Beef

160°F–175°F

71°C–79°C

Pastrami

160°F–175°F

71°C–79°C

Prime Rib — Rare

130°F

54°C

Steaks — Broiled/Fried

140°F–160°F

60°C–71°C

Ribs — Beef Or Pork

160°F

71°C

Veal

160°F–175°F

71°C–79°C

Ham

160°F–175°F

71°C–79°C

Pork

160°F–175°F

71°C–79°C

Lamb

160°F–175°F

71°C–79°C

Poultry

Chicken — Fried/Baked

160°F–175°F

71°C–79°C

Duck

160°F–175°F

71°C–79°C

Turkey

160°F–175°F

71°C–79°C

General

160°F–175°F

71°C–79°C

Fish/Seafood

Fish — Baked/Fried

160°F–175°F

71°C–79°C

Lobster

160°F–175°F

71°C–79°C

Shrimp — Fried

160°F–175°F

71°C–79°C

Baked Goods

Breads/Rolls

120°F–140°F

49°C–60°C

Miscellaneous

Casseroles

160°F–175°F

71°C–79°C

Dough — Proofing

80°F–100°F

27°C–38°C

Eggs — Fried

150°F–160°F

66°C–71°C

Frozen Entrees

160°F–175°F

71°C–79°C

Hors d'oeuvres

160°F–180°F

71°C–82°C

Pasta

160°F–180°F

71°C–82°C

Pizza

160°F–180°F

71°C–82°C

Potatoes

180°F

82°C

Plated Meals

140°F–165°F

60°C–74°C

Sauces

140°F–200°F

60°C–93°C

Soup

140°F–200°F

60°C–93°C

Vegetables

160°F–175°F

71°C–79°C

The holding temperatures listed are suggested guidelines 

only. All food holding should be based on internal product 

temperatures. Always follow local health (hygiene) 

regulations for all internal temperature requirements.

Содержание 300-TH/III Touch

































Отзывы: