background image

 

MN-37010 (Rev. 8) 03/18 • Arby’s 300-TH/III Touch

 • 

11

Installation

A number of adjustments are associated with initial 

installation and start-up.  It is important that these 

adjustments be conducted by a qualified service technician.  

Installation and start-up adjustments are the responsibility 

of the dealer or user.  These adjustments include but are not 

limited to thermostat calibration, door adjustment, leveling, 

electrical hook-up and installation of optional casters or legs.

Leveling

Level the oven from side-to-side and front-to-back with the use of a spirit 

level.  For ovens installed with casters, it is important that the installation 

surface be level due to the probability of frequent oven repositioning.

We recommend checking the level of the oven periodically to make certain the floor has not shifted nor the oven moved.

NOTICE

  Failure to properly level this oven can cause improper function and will result in the uneven baking with 

products consisting of semi-liquid batter.

   WARNING

RISK OF ELECTRIC SHOCK.

Appliance must be secured to building 

structure. Failure to observe this precaution 

may result in damage to the equipment and 

severe personal injury.

User Safety Information

The Alto-Shaam cook and hold oven is intended for use 

in commercial establishments by qualified operating 

personnel where all operators are familiar with the 

purpose, limitations, and associated hazards of this 

appliance.  Operating instructions and warnings must 

be read and understood by all operators and users.

CAUTION

To prevent 

personal injury

 or 

property damage

:

Always

 use hand protection when 

operating this appliance to avoid burns. 

Metal parts of this equipment become 

extremely hot when in operation.

W017

Warning; Hot surface

    WARNING

To prevent serious personal injury, death, or 

property damage: 
Do not steam clean, hose down or flood the 

interior or exterior with water or liquid solution 

of any kind. 

Do not use water jet to clean. Failure 

to observe this precaution will void the warranty.

      WARNING

  

To prevent serious injury, death, or property 

damage, 

always disconnect the appliance 

from the power source before cleaning 

or servicing.

Содержание 300-TH/III Touch

































Отзывы: