background image

 

MN-37010 (Rev. 8) 03/18 • Arby’s 300-TH/III Touch

 • 

4

Delivery

This Alto-Shaam appliance has been thoroughly 

tested and inspected to ensure only the highest quality 

appliance is provided. Upon receipt, check for any 

possible shipping damage and report it at once to the 

delivering carrier. See Transportation Damage and 

Claims section located in this manual.
This appliance, including unattached items and 

accessories, may be delivered in one or more packages. 

Ensure all standard items and options have been 

received with each appliance as ordered. Save all the 

information packed with the appliance. Register the 

appliance online at 

www.alto-shaam.com/en/support/

warranty-registration

 to ensure prompt service in the 

event of a warranty parts and labor claim. 
This manual must be read and understood by all 

people using or installing the appliance. Contact the 

Alto-Shaam Tech Team Service Department if you 

have any questions concerning installation, operation, 

or maintenance.
1-800-558-8744; [email protected]

CAUTION

Appliance and accessories may be 

heavy. To prevent serious injury, 

always 

use a suff icient number of trained and 

experienced workers when moving or 

leveling appliance and handling accessories.

Environmental Conditions

Operational Environmental Conditions
•  Before use, appliance must acclimate to room 

temperature in the environment it is placed — 24 hours 

is recommended.

•  Ambient temperature range of 60°F to 110°F (16°C to 43°C).
•  Relative humidity of less than 95% non-condensation.
•  Atmospheric pressure range of 50kPa to 106kPa.

The serial number is required for all inquiries.

Always include both model and serial number(s) in any 

correspondence regarding the appliance.

 Model:   ______________________________________________  
 

Serial number:   ______________________________________________

  Purchased from:   ______________________________________________
 

Date installed:   ____________________  Voltage:   _____________

Содержание 300-TH/III Touch

































Отзывы: