Alstom DS Agile H38 Series, Инструкция по установке и эксплуатации

Страница: 54 / 59

H38x/EN GL/D11 Global Documentation
Page 50/53 DS Agile H38x
8.5 Informative commands
The informative commands are given in the table below.
Informative command Syntax Example
Configuration summary getConfig getConfig
Status indication of various
elements of the board getStatus getStatus
Dumps the switch ATU
table getSwitchATU getSwitchATU
Print the proxy node table pn pn
PTP State getPTPState getPTPState
Typing in the “getConfig” command will return the switch configuration, an example of which
is shown in the figure below:
~ # getConfig
Alstom PRP4 version :
---------------------
- Board type : BCU
- PRP core version : Version 4.111
- HDL version : Version 2.0
- Linux version : 174 Tue Jul 31 16:40:44 CEST
2012 nios2 GNU/Linux
Current configuration is :
--------------------------
- IP Add : 192.168.0.22
- Gateway IP Add : 192.168.0.99
- Netmask : 255.255.255.0
- MAC Add : 80:b3:2a:ff:e0:96
- NTP Server : 192.168.0.88
- NTP update Frequency : 100
- Trap IP : 192.168.0.6
Available users are :
root
user
Duplicate Detection:
--------------------
memory for 1024 frames, 400 ms aging time
Command line
Typing in the “getStatus” command will return the switch status, an example of which is
shown in the figure below:
~ # getStatus
FPGA configuration used (Factory or Application mode) :
----------------------------------------------------- :
Mode: application with watchdog
(or Fail-Safe (Factory))
Port status
-----------
sw0: no link
sw1: no link
sw2: no link
sw3: no link
sw4: no link
lreA: 100 Mbit, full duplex, link ok
lreB: 100 Mbit, full duplex, link ok
lreI: always connected
sw5: always connected