Global Documentation
H38x/EN GL/D11
DS Agile H38x
Page 45/53
8.4 Management
commands
Management command
Syntax
Example
Hard Reboot
reboot
reboot
Reboot in factory mode
rebootFailSafe
rebootFailSafe
Get all statistics of the switch getSwitchStats
getSwitchStats
Reset all statistics of the switch
switchResetStats switchResetStats
Turn a switch port On or Off
switchPortOnOff N° ON/OFF
switchPortOnOff 2 OFF
Turn a PRP core port On or Off
prpPortOnOff <port> <ON:OFF>
prpPortOnOff A OFF
Turn an external Phy On or Off
prpPhyOnOff <port> <ON:OFF>
prpPhyOnOff A OFF
En/Disable Optical Transceiver A
prpTransceiverADisable <0/1>
prpTransceiverADisable 0
En/Disable Optical Transceiver B
prpTransceiverBDisable <0/1>
prpTransceiverADisable 0
Force a value (0 or 1) on the relay1
forceRelay1 <0/1>
forceRelay1 0
Force a value (0 or 1) on the relay2
forceRelay2 <0/1>
forceRelay2 0
Remove forced value for the relay1
unforceRelay1
unforceRelay1
Remove forced value for the relay2
unforceRelay2
unforceRelay2
Update the software
Update <FTP server IP Addr.>
Update 192.168.0.179
Two reboot commands are available. The command “reboot” forces a hard reboot equivalent
to a power-up. The command “rebootFailSafe” forces a reboot to the factory failsafe/alarm
mode and extinguishes LED7 as shown in the figures below:
~ # reboot
Will now reboot to application bitstream
Action
Command line
~ # rebootFailSafe
Will now reboot to fail-safe bitstream
Action (the LED7 is OFF)
Command line
Содержание DS Agile H38 Series
Страница 1: ...DS Agile H38x Global Documentation H38x EN GL D11...
Страница 2: ......
Страница 58: ......