Alcatel Vacuum Technology Adixen ATH 1300 M, Руководство пользователя

Страница: 53 / 122

B 70
Heating band connection
1/2
GB 01731 - Edition 02 - Januar
y 04
Alcatel Vacuum Technology France - User’s Manual ATH 1300 M/MT - ATH 1600 M/MT
INPUTS/OUTPUTS
DRY CONT
ACTS
PUMP CABLE
REM.
RS 232
MODEM
RS 232
Don’t forget to connect
the connector to the
ground. (Screw M5).
Thermostatic
cable
Connect to the heating
band on the pump
Connect to
the water valve
Connect to the «Dry Contacts»
on terminals 5-6 and 11-12,
or on the machine if the
temperature is regulate by the
customer device
(see B 90) .
Connect the thermostatic cable
to the power line
(main with ground connection).
Water valve cable
Water valve grounding cable
For thermostated MT
models
Connection
These pumps are equipped with an heating band,
a thermal sensor and a valve to regulate the water flowrate.
The body of the pump can be heated to 75°C to avoid gas
condensation in the pump on the semiconductor processes.
Connect the thermostatic cable as follows:
Voltage or current hazard sufficient
to cause shock. Disconnect and
isolate power before servicing.
WARNING
HAZARDOUS VOLTAGE ENCLOSED
Danger risk of electric shock, disconnect main
power source and heater power. (if heater
is used, max 110/230 V, 300 VA, 50/60 Hz).
Prior to servicing and wait 5 minutes before
working on this equipment.
Ex: model ATH 2300 MT