Alcatel Vacuum Technology Adixen ATH 1300 M, Руководство пользователя

Страница: 54 / 122

Hot surfaces are signalled by a label-sticked on
hot surfaces. The pump housing temperature can
reach 75° C. Contact may cause burn. Do not
touch or wear protective gloves before servicing.
B 70
Heating band connection
2/2
GB 01731- Edition 02 - Januar
y 04
Alcatel Vacuum Technology France - User’s Manual ATH 1300 M/MT - ATH 1600 M/MT
Heating band temperature
The sticker «hot surface» must be
sticked conspicuously on the pump
housing.
WARNING
Contact may cause burn.
Do not touch or wear protective gear
before servicing.
HOT SURFACE
Temperature is regulated by the controller.
Connect the heater cable via the «THERMOSTAT» contact
on the DRY CONTACTS connector and to the power line
(110 or 230 VAC).
The heater cable (110 or 230 V) (
see A 50
) must be
choosen in function of the power supply (110 or 230 V).
The temperature can be choosen on the controller
(between 31 and 75°C or OFF).
By choosing «OFF» temperature, the heating band is
switched off and the pump is cooled permanently.
The temperature of the pump can be read on the display
of the controller
(see C 30) .
On certain type of pumps,
a thermoswitch is integrated and cut the power supply of
the heater at pump body temperature of T > 100°C.
The thermoswitch is manually resetable from the outside of
the pump.
6
5
Thermostat
Thermostat
Dr
y contacts
Heating
band
11
12
* External power supply in accordance with the heater band voltage.
*
*
6
5
Thermostat
Thermoswitch
Heating
band
WARNING