Mounting the Equipment
4200-088
8-2
Revision 1.03
The following steps should be followed to mount the unit using banding:
Precut Banding
Measure the perimeter of the battery to precut
banding.
Thread Bracket with Banding
Insert banding in the slots provided on the multi–
use bracket. Ensure banding is routed through
both sides of the bracket.
Alternate Mounting with Banding
As an alternate, the banding can be routed
through the slots on the rear of the UXBM and
UXSM.
Install banding Adjustment Clip
Wrap banding around the object that the unit will
be mounted to. Typically this is a battery that is
being monitored by the UXBM and UXSM. Insert
the adjustment clip
