Installing the Fiber Optic Cable
4200-088
11-2
Revision 1.03
Figure 30 - Fiber Optic Connection (Method 2)
When routing and terminating the fiber optic, there are a couple things that should be considered. The
minimum bend radius should not be less than 35mm or 1.4” and maximum length between modules
cannot exceed 250’ or 76 meters. Doing so will cause degradation in the signal which will manifest itself
as intermittent or no communications.
Figure 31 - Minimum Fiber Optic Bend Radius
Note
: When installing the fiber optic cable, do not bend the cable in a radius less than 1.4” or
35mm and maximum length between modules cannot exceed 250’ or 76 meters.
