Airwell EFL 100-3R410, Техническое руководство, Страница: 112 / 328

3
3 - 75
Control of 3-WAY FLOW LOGIC
5. Schedule Timer / NWTM-FL
■ ■
How to Clear Programs
Press the PROGRAM button.
•
•
•
•
•
•
•
•
When the PROGRAM button is pressed, the group No. and the
present day of the week start blinking and the present time
indication changes to a blinking “PG-1”.
Press the GROUP button to select a group to clear.
NOTE
Group selection may be disabled during installation. If so,
proceed to the next step.
Holding down the CANCEL button for more than 2 seconds
returns the program to the point prior to pressing the PROGRAM
button. (All operations made up until that point are cleared.)
To cancel specific days
Select a day to cancel using the DAY button
and press the CLEAR button. All settings in
programmed operations
through are
cleared. The display appears as shown above.
Press the PROGRAM button to enter the clear
operation. The normal display returns without
the program schedule marker (
) underneath
the days of the week.
To cancel individual programs on specific days
Select a day and press the SET button.
Programmed operations
through start
blinking in rotation, therefore press the CLEAR
button when the programmed operation to clear
starts blinking. (The remaining programmed
operations are automatically arranged in the
order of earliest time first.)
Press the PROGRAM button to enter the clear
operation. The normal display returns.
Example:
Display after clearing
programmed operation
above
04-218 Airwell-3_p61-85.qxp 01/06/2007 13:12 Page 75