AIRTRONICS SD-6G, Руководство по эксплуатации

Страница: 26 / 92

Page 26
aERO MODEL TyPE
Some selection options are dependent on other selection options and may not be able to be changed.
If you want to go back and change the settings or if you don't want to create the new settings for any reason, press the
DEC-/M2 or END/M3 keys.
Saving Model Type Selection Options
1) After making your choices, press the ENTER key. CREATE NEW
DATA? will be displayed and INC+ will flash in the Programming Window.
2) Press the INC+/M1 key to Create New Data. After ~10 seconds, the
new Programming Data will be loaded into the transmitter as indicated
by the progress bar, and COMPLETE!! will be displayed in the
Programming Window. Press any key to return to the TYPE menu.
04.TRainER (TRainER SySTEM)
The SD-6G transmitter features a Trainer System that allows you to connect two SD-6G transmitters to one another, or connect
one SD-6G transmitter to one SD-5G transmitter or to one SD-10G transmitter, for the purpose of training a new pilot or for training
a more experienced pilot on a new model.
During use, one transmitter acts as the Master (Instructor) and the other transmitter acts as the Slave (Student). The Instructor
controls the Student's model as long as the Trainer switch is released. For example, once the Instructor maneuvers the model to a
safe altitude, the Instructor pulls and holds the Trainer switch to give control of the model to the Student. The Student will have
control of the model as long as the Instructor holds the Trainer switch. Once the Trainer switch is released, the Instructor will have
control of the model once again. If at any time the Instructor feels that the Student is in a situation that endangers the model, the
Instructor releases the Trainer switch and control of the model returns instantly to the Instructor.
Making AERO Model Type Selection Options, Continued....
2) Press the Navigation Pad
56
to highlight the AERO Model Type
selection option you wish to change, for example, AILE>1.
3) Press the INC+/M1 or DEC-/M2 keys to change the selection option.
When a Model Type selection option is changed, ENTER will flash in
the Programming Window.
IMPORTANT INFORMATION ABOUT THE TRAINER SYSTEM
l
The Trainer System is currently compatible ONLY with another SD-6G transmitter or an SD-5G or SD-10G transmitter and
you MUST use the Airtronics 97107 Trainer Cable. See your local Airtronics dealer for more information and availability.
l
During use, both the Master transmitter and the Slave transmitter should be turned ON. If using an SD-10G transmitter as
the Slave transmitter, to save battery power only the transmitter LCD needs to be turned ON, using the DISPLAY key.
l
Both transmitters must be programmed identically for the Trainer System to function properly. For example, Servo Reversing,
Servo End Point Adjustments, etc. must be identical.
l
The Instructor transmitter Trainer System function must be set to MASTER and the Student transmitter Trainer System
function must be set to SLAVE.
If using the Trainer System with an Airtronics SD-5G transmitter or an SD-10G transmitter, please refer to those transmitter's
Operating Manuals for more information on the correct setup and use of those transmitter's Trainer functions.
Connecting the Master and Slave Transmitters
1) Turn both transmitters OFF.
2) Plug one end of the Airtronics 97107 Trainer Cable (available separately) into the back of one SD-6G transmitter, then
plug the other end of the Trainer Cable into the back of the second SD-6G transmitter or an SD-5G or SD-10G transmitter.
4) Repeat steps 2 and 3 to change the options for any of the other AERO Model Type selection options you wish to change.