AIRTRONICS SD-6G Скачать руководство пользователя страница 48

Страница: 48 / 92

Page 48

Two Compensation Mixing functions are available, however, only one Compensation Mixing function can be Active at one

time. If F-MODE is set to COMMON, both Compensation Mixing functions will controlled by the Compensation Mixing

switch and Compensation Mixer 2 will always override Compensation Mixer 1. If F-MODE is set to SEPARATE, you can control

one Compensation Mixing function using the Compensation Mixing switch and control the second Compensation Mixing function

(programmed to a different Flight Mode) using a Flight Mode switch, however, keep in mind that higher numbered Flight Modes

will always override lower numbered Flight Modes.

aERO MODEL TyPE

22. & 23.c-MiX1 anD c-MiX2 (cOMPEnSaTiOn MiXing), cOnTinUED....

Transmitter F-MODE refers to the Flight Mode that the transmitter is currently operating in. Programming F-MODE refers

to the Flight Mode that you would like to change the programming for.

Programming F-MODE

Transmitter F-MODE

Choosing the Flight Mode - Common or Separate

1) From the Display screen, press the ENTER key to display the Programming

Menus.

2) Press the Navigation Pad

to highlight either C-MIX1 or C-MIX2,

then press the ENTER key to display the C-MIX1 or C-MIX2 menu. The

cursor will default to MASTER>EL.

3) Press the Navigation Pad

to move the cursor to F-MODE>COMMON.

4) Press the INC+/M1 or DEC-/M2 keys to choose either SEPARATE or

COMMON.

5) If you choose SEPARATE, press the F-MODE key to choose the F-MODE

number you would like to program the Compensation Mixing function

for. Choose from FN, F1 or F2.

Choosing the Master Channel

The Master channel is the channel that controls the Slave channel. For example, if you set the Master channel to EL (Elevator),

when you move the elevator control stick, the Slave channel that's mixed to the elevator channel will move.

1) Press the Navigation Pad

to highlight MASTER>EL, then press the

INC+/M1 or DEC-/M2 keys to change the desired Master channel.

MASTER setting range is EL (Elevator), AI (Aileron), TH (Throttle),

RU (Rudder), GE (Gear), and FL (Flap). The default setting is EL (Elevator).

In all cases, the Master channel always controls the Slave channel.

Содержание SD-6G





























































































Результаты поиска

Содержание SD-6G

Отзывы:

Похожие инструкции для SD-6G

Бренды по названию

Популярные бренды

AIRTRONICS SD-6G, Руководство по эксплуатации

Результаты поиска

Содержание SD-6G

Отзывы:

Похожие инструкции для SD-6G

Бренды по названию

Популярные бренды