AIRTRONICS SD-6G, Руководство по эксплуатации

Страница: 37 / 92

Page 37
aERO MODEL TyPE
WARNING
When the Trim Flight Mode option is set to Separate or SEPARATE TH-TRIM LOCK (F1), Digital Trim values are
stored in the specific Flight Mode you're using when you change the trim using the trim switches. For example, you could have
10 'clicks' of Up elevator trim in Flight Mode FN (Normal) and 5 'clicks' of Up elevator trim in Flight Mode F1.
Be cautious of
this when switching between Flight Modes during flight. In addition, if SEPARATE TH-TRIM LOCK (F1) is chosen, throttle
trim will NOT be adjustable when in Flight Mode F1.
Choosing the Trim Flight Mode Option, Continued....
3) Press the INC+/M1 or DEC-/M2 keys to choose the desired Trim Flight
Mode option, either COMMON, SEPARATE or SEPARATE TH-TRIM
LOCK (F1).
TRIM setting range is COMMON, SEPARATE, or SEPARATE TH-TRIM
LOCK (F1). The default setting is COMMON.
14.Th-cURvE (ThROTTLE cURvE)
The Throttle Curve function allows you to vary the amount of throttle servo travel in relation to the movement of the throttle control
stick at different points throughout the entire range of deflection. Five custom-programmable Points ensure a precise Throttle
Curve to suit any situation. For example, many glow and gas engines are very non-Linear, meaning that when the throttle control
stick is at half, the engine is not at half power. In addition, many times the difference between three-quarter power and full power
is almost indistinguishable. Using the Throttle Curve function, you can change the way the engine reacts to power based on
the position of the throttle control stick. For example, you can change the Throttle Curve so that three-quarter stick feels like
three-quarter throttle.
For greater flexibility, the Throttle Curve function can be programmed either the same for all Flight Modes or separately for each
of the three Flight Modes. A graph with Input and Output indicators help with programming visualization.
Transmitter F-MODE refers to the Flight Mode that the transmitter is currently operating in. Programming F-MODE refers
to the Flight Mode that you would like to change the programming for.
Transmitter F-MODE
Programming F-MODE
Stick Input
Function Output
150%
100%
100%
150%
0%
Point Positions
As you change the Point values and Rate percentage values, you can use the graph and Input and Output indicators to
visualize the ratio between control stick movement and servo travel throughout the entire deflection range.
Choosing the Flight Mode - Common or Separate
1) From the Display screen, press the ENTER key to display the Programming
Menus.
2) Press the Navigation Pad
56
to highlight TH-CURVE, then press
the ENTER key to display the TH-CURVE menu. The cursor will
default to POINT>1.
AERO
MODEL
TYPE