AIRTRONICS SD-6G, Руководство по эксплуатации

Страница: 55 / 92

Page 55
hELi MODEL TyPE
Deleting a Character
1) Press the INC+/M1 or DEC-/M2 keys to move the underscore under the character you want to erase.
2) Press the Navigation Pad
5634
to highlight the Erase Bracket , then press the ENTER key to erase the underscored
character.
Deleting a Model Name
1) Press the INC+/M1 and DEC-/M2 keys at the same time to move the underscore under the first character.
2) Press the Navigation Pad
5634
to highlight the Erase Bracket , then press the ENTER key repeatedly to erase the entire
Model Name.
02.MODEL naME (MODEL naMing), cOnTinUED....
03.TyPE (MODEL TyPE)
The Model Type function allows you to quickly set up the transmitter's low-level mixing based on the type of model you're
flying. Common templates for HELI and AERO Model Types are provided. For example, if your model features CP3F swashplate
mixing, choosing the CP3F option will automatically change the transmitter's programming to accommodate this setup. This
takes the guess-work out of setting up your model.
WARNING The Model Type function is used when setting up a new model and should be done prior to making any
programming changes to your model. When Model Type selection options are changed for the currently selected model,
all programming (including custom programming) for that model will be reset.
2) Press the Navigation Pad
56
to highlight TYPE, then press the
ENTER key to display the TYPE menu. The cursor will default to >HELI
or >AERO depending on the particular model you've selected.
3) If the current Model Type is >AERO, press the INC+/M1 or DEC-/M2
keys to change the selection option to >HELI.
Changing the Model Type
1) From the Display screen, press the ENTER key to display the Programming Menus.
Making HELI Swashplate Type Selection Options
Choose the HELI Swashplate Type that suits your helicopter. There are three basic Swashplate Types available:
Normal - In this configuration the swashplate does not control pitch. It only controls right, left, fore, and aft cyclic. Usually the
servos are installed 90º apart but do not mix with collective to control pitch. This configuration is generally used for fixed-pitch
helicopters or helicopters that have a completely separate control system to control collective pitch.
3-Point CCPM - In this configuration the cyclic and collective controls are mixed. The servos that control the swashplate are
installed either 120º or 140º apart, depending on the configuration.
4-Point CCPM - In this configuration the cyclic and collective controls are mixed. The servos that control the swashplate are
installed 90º apart.
Receiver channel slot assignments will change based on the Swashplate Type selection options chosen. To verify which
receiver channel slots to plug your servos into, navigate to the SX MONITOR menu after saving your Swashplate Type
selection options. For more information, see page 80.
1) From within the TYPE menu, verify that >HELI is displayed. If >AERO is displayed, change the Model Type to HELI by
following the steps in the Changing the Model Type section above.
HELI MODEL
TYPE