AIRTRONICS SD-6G, Руководство по эксплуатации

Страница: 36 / 92

Page 36
aERO MODEL TyPE
Choosing the Channel
1) Press the Navigation Pad
34
to highlight the channel you would like to
make Exponential percentage value changes to. Choose either <EL>,
<AI>, or <RU>.
Exponential can be set for EL (Elevator), AI (Aileron), and RU (Rudder).
Changing the Exponential Percentage Values
The Exponential function is linked directly to the Dual Rate switch. This allows you to program Exponential for each of the two
Dual Rate positions separately. For example, with the Dual Rate switch in position 1 (maximum travel), you can set the Exponential
percentage value to 30% to soften the control feel around neutral and with the Dual Rate switch in position 2 (reduced travel) you
can set Exponential percentage value to 0%. When the Exponential percentage value is set to 0%, the ratio between servo travel
and control stick movement will be Linear throughout the entire range of deflection.
WARNING
If you have not used Exponential functions in the past, we suggest that you start with a small percentage
of Exponential (approximately 10%~20%) until you get used to the feel of how Exponential affects the control feel of
your model. You will find that Exponential is most useful where strong control response is desired at extreme control
stick positions, but softer control response to small control stick movements is desired in order to make very accurate
small corrections to the flight path.
1) Press the Navigation Pad
6
to move the cursor to EXP>0%.
2) Move the Dual Rate switch to the position you would like to set an
Exponential percentage value for, either 1 or 2.
3) Press the INC+/M1 or DEC-/M2 keys to set the desired Exponential
percentage value for the channel you chose previously.
EXP setting range is -100% to 100%. The default setting is 0% (Linear). Increasing the Exponential percentage value softens
the control feel around neutral. Decreasing the Exponential percentage value heightens the control feel around neutral.
13.TRiM (DigiTaL TRiM)
The SD-6G transmitter features Digital Trim Memory. Any amount of control surface trim that you set during flight using the trim
switches is automatically stored in memory for that specific channel and for that specific model. The Digital Trim values for each
model will automatically be loaded when the transmitter is turned ON. The Trim function allows you to choose whether you want
trim changes saved the same across all three Flight Modes or if you want trim changes saved separately for each of the three
Flight Modes. In addition, an option to lock the throttle trim in Flight Mode F1 is also available. This feature is convenient when
flying aerobatics with a custom Throttle Curve in Flight Mode F1, because if accidentally hit, the throttle trim could change your
Throttle Curve and cause unintended consequences.
An audible double-tone is heard when the trim switches reach the center position. This allows you to know when the trim
switches reach the center position without the need to look at the Trim Indicators on the Display screen.
Choosing the Trim Flight Mode Option
1) From the Display screen, press the ENTER key to display the Programming
Menus.
2) Press the Navigation Pad
56
to highlight TRIM, then press the
ENTER key to display the TRIM menu. The cursor will default to
F-MODE>COMMON.
12.D/R & EXP (DUaL RaTE anD EXPOnEnTiaL), cOnTinUED....