Airo A16 J Series, Руководство пользователя

Страница: 46 / 128

User’s Manual – A16 J A18 J Series Page 46
5.2. On-Ground control panel and electric control unit.
The on-ground control panel (or electric control unit - fig. 6) contains the main electronic boards needed to operate the
machine and carry out safety checks.
The on-ground control panel is located on the rotating turret (see paragraph "Location of main components") and should
be used to:

Turn the machine ON/OFF.
 Select the control panel (ground or platform).
 Operate the platform in emergency cases.
 Display some operation parameters (working hours; diesel engine operational faults; battery charger operation;
etc.).
DO NOT
use the on-ground control panel as a workstation when personnel are on the platform.
Strictly use the on-ground control panel to start/stop the machine, to select the control panel or in
emergency situations to allow the platform to be recovered.
Give the keys to authorized persons only and keep a duplicate in a safe place.
Always remove the on/off key at the end of work shifts.
Only allow access to the controllers to specialized personnel for maintenance and/or repair
purposes. Access the electric control unit only after the machine has been disconnected from any
230V or 380V power sources.
Fig.8