Airo A16 J Series, Руководство пользователя

Страница: 48 / 128

User’s Manual – A16 J A18 J Series Page 48
5.2.5. User interface display (E)
The multifunction display for machine/user interface is used to display:

The operation parameters of the machine during normal functioning or in the event of a fault;

The working hours of the Diesel engine (when Diesel power is selected the working hours are displayed in the
format HOURS:MINUTES followed by a D at the end);

The working hours of the DC emergency pump (when 12V electrical power is selected the working hours are
displayed in the format HOURS:MINUTES followed by an M at the end);
 The working hours of the single or three-phase pump (when 220V or 380V electric power is selected, the number of
working hours are displayed on the platform in the format HOURS:MINUTES followed by an E at the end). This is an
OPTIONAL feature;
 The battery charge level (only electrical models E).
The user interface display is also used during any interventions by specialized personnel to adjust
the working parameters of the machine. This function is not available to the user.
5.2.6. Battery charger warning light (F)
Electric and combination power models (“E”, “ED” and “EB”) equipped with a built-in high frequency battery charger, are
provided with this pilot light indicating the operation of the battery charger (for more detailed information read the
paragraph “Battery charge”).
5.2.7. Enabled control panel warning light (G)
When this green pilot light is ON, it indicates that the machine is ON and the ground control panel is enabled (main key
C should be set on “turret”).
5.2.8. Engine pilot lights (H-L-M-N)
These pilot lights warn the user of any engine operation fault (models “D” and “ED”). One of these lights turns ON when
the engine stops. A “fault” message is sent to the operator in the basket (see paragraph “Platform control panel”).
Once the Diesel engine has stopped due to a problem signalled by one of these warning lights, the engine can no longer
be re-started until such problem has been solved.
5.2.9. Basket control levers (O P Q R S T U).
The various joysticks shown in the figure allow the basket to be operated. The various movements are performed in
accordance with the pictograms on the machine. These controls can be operated only if the on-off key is set to ON
(downwards) (ground control panel selected). Don't forget: the controls on the ground panel are to be only used for
emergency
operations. It should not be used for any other any purpose.
Use the ground controls only in emergency situations to allow the platform to be lowered.
IT IS FORBIDDEN to use the ground control station as a workstation when personnel is on the platform.