Airo A16 J Series, Руководство пользователя

Страница: 51 / 128

User’s Manual – A16 J A18 J Series Page 51
5.4.2. Starting the 230V single-phase electric pump (OPTIONAL)
Diesel powered models can be equipped, on request,
with a 230V electrical pump.
To start the electrical pump:
1) Insert the 230 V plug of the power cable into the
socket ( A ).
2) Set the switch ( B ) shown in figure on ON.
3) To start the electrical pump from the control panel on
the platform, you must:

Select the control panel on-the-basket by means
of the key-switch located on the electric control
unit of the chassis.;

Unlock the push-button turning by a ¼ of turn
clockwise.

Set the power selector on the platform on
"Electric".
 Set the power selector on the platform (if any)
on “230V".
 Operate the machine.
Please note: The manoeuvres powered by a 230V
pump are considerably slower than those powered by
the diesel engine.
Fig. 10
CAUTION! Always check the position of the power cable during transfers and operating motions.
Operating the platform with 230V three-phase pump, is only possible from the platform.
Disconnect all power ports before you open any box.