Airo A16 J Series, Руководство пользователя

Страница: 57 / 128

User’s Manual – A16 J A18 J Series Page 57
6. HANDLING AND TRANSPORTATION
6.1. Handling
Before start-up, make sure that the turret mechanical
safety has been unlocked (see picture aside).
To handle the machine in normal operating conditions
follow the instructions given in chapter "OPERATING
INSTRUCTIONS" under paragraph "Drive and steering”.
When the platform is completely DOWN (or at any other
safe position based on your application and trials), start
handling (i.e. driving) at the speed you wish to travel.
With platform at a given height, the drive speed is
automatically limited, and cannot be changed.
The section TECHNICAL FEATURES indicate the limits
concerning driving/handling for each model.
Fig.15
WARNING!
Driving with the lifted platform may be subject to different restrictions according to the country
where the machine is used. Find out about the legislative limits concerning this operation from
Health and Safety Authorities at your place.
It is absolutely forbidden to travel with the machine when the basket is lifted unless the ground is
horizontal, flat and solid.
Before carrying out any travel, make sure that no people are in the proximity of the machine and in
any case proceed with the utmost caution.
Before moving the machine make sure that all connections are disconnected from the power supply
source.
Check that there are no holes or steps on the floor and bear the machine overall dimensions in mind.
Do not use the machine to tow other vehicles.
Before steering and driving the machine, check the actual position of the turret (see the relevant
labels and signs on the chassis) so as to travel in the correct direction.
Do not load anything on the basket while the basket is UP and the machine travels (operators on
board are not allowed to pull wires or ropes, etc...)