Airo A16 J Series, Руководство пользователя

Страница: 70 / 128

User’s Manual – A16 J A18 J Series Page 70
7.2.6. Air purging from the locking cylinder of the floating axles.
Stop the machine and wait for it coming to a complete
standstill. While the basket is UP, let the cylinders lock the
axle lock in their actual position, so that machine stability
is assured.
Once a year, make sure that there is no air trapped inside
the cylinders of the floating axle.
To check this, proceed as follows:

Remove the casing ( A) from the cylinders
of the floating axle.

Undo the cap ( B) of one of the two
cylinders of the floating axle.

Let the machine perform some travelling
until the cylinder of the floating axle
cylinders reaches against end stop several
times, and until you see oil flowing out of
the plug of the check valve.
 As soon as all air has been purged out,
tighten the plug ( B ) back in place and
check the oil level in the tank.
Fig.24
ATTENTION!
THIS OPERATION MUST BE CARRIED OUT SIMULTANEOUSLY BY TWO OPERATORS: ONE IS TO
DRIVE THE MACHINE, THE OTHER IS TO CHECK THE OPERATION AND COLLECT THE LEAKING
OIL.
THIS OPERATION MUST BE CARRIED OUT IN ROOMS WHERE IT IS POSSIBLE TO SAFELY
COLLECT THE LEAKING OIL FROM THE CYLINDERS.
THIS OPERATION IS VERY IMPORTANT AND MUST BE CARRIED OUT BY SPECIALIZED
TECHNICIANS ONLY.