Ahlborn ALMEMO 5690-2M Скачать руководство пользователя страница 9

Страница: 9 / 92

Scope of delivery

3.2 Scope of delivery

When you unpack the device check carefully for any signs of transport damage
and that delivery is complete.

Measuring instrument ALMEMO

5690-2M

SD card and USB card reader
Mains adapter ZB1212-NA9 12V, 2.5A

These operating instructions
ALMEMO

Manual

CD with the AMR-Control software and various useful accessories

In the event of transport damage please retain the packaging material and in-
form your supplier immediately.

3.3 Waste disposal

The pictogram showing a waste bin crossed through means

that the product is subject to European Union regulations on
segregated waste disposal. This applies both to the prod-

uct itself and to any accessories marked with the same
symbol. Disposal of any such item as unsorted domestic

waste is strictly forbidden

•

Please dispose of all packaging materials according to the applicable national

waste management regulations.

•

Please dispose of cardboard boxes, protective plastic packaging materials,
and all preservative substances separately and in the proper manner.

•

The disposal of the device itself (also of device parts, accessories, and con-

sumables) is subject to the applicable national and local waste management
regulations and to the environmental protection legislation in force in the coun-

try of use.

•

Please dispose of all waste in the proper manner;
this applies in particular to all parts and substances that constitute a hazard

for the environment. This includes inter alia plastics, batteries, and recharge-
able battery packs .

•

When disposing of goods, please wherever possible use the original packag-

ing materials.

ALMEMO

5690-2M

Содержание ALMEMO 5690-2M





























































































Результаты поиска

Содержание ALMEMO 5690-2M

Отзывы:

Похожие инструкции для ALMEMO 5690-2M

Бренды по названию

Популярные бренды

Ahlborn ALMEMO 5690-2M, Руководство по эксплуатации

Результаты поиска

Содержание ALMEMO 5690-2M

Отзывы:

Похожие инструкции для ALMEMO 5690-2M

Бренды по названию

Популярные бренды