Ahlborn ALMEMO 5690-2M Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 92

background image

8. Connecting the transducers

8. CONNECTING THE TRANSDUCERS

Virtually any ALMEMO

®

sensor can be connected to the input sockets on

ALMEMO

®

modules types (6) and (7). To connect your own existing sensors

you simply need the appropriate ALMEMO

®

connector. Other compact modules

are described below.

8.1 Transducers

The ALMEMO

®

Manual includes detailed descriptions of the comprehensive

ALMEMO

®

range of sensors (see Manual Ch 3) and instructions for connecting

your own existing sensors to ALMEMO

®

instruments (see Manual Ch 4). All

standard sensors with an ALMEMO

®

connector usually have the measuring

range and units already programmed and can thus be connected to any input

socket without further adjustment. A mechanical coding system ensures that

sensor and output modules can only be connected to the correct sockets. All

ALMEMO

®

connectors incorporate two snap-lock levers; these snap into posi-

tion as soon as the connector is inserted into the socket, thus preventing unin-

tended disconnection if the cable is accidentally pulled. To withdraw the con-

nector, both these levers must be pressed in at the sides.

8.2 Measuring inputs and additional channels

Measuring circuit board MM-A9 has 9 input sockets (6c) to which initially mea-

suring channels M0 to M8 are allocated. However, ALMEMO

®

sensors can, if

required, provide up to 4 channels with 9 input sockets each so that altogether

36 channels are available. The additional channels can be used in particular for

humidity sensors with four measuring variables (temperature / humidity / dew

point / mixture ratio) or for function channels. Each sensor can if necessary be

programmed with several measuring ranges or scaling settings; and two or

three sensors, if pin assignment so permits, can be combined in a single con-

nector (e.g. rH / NTC, mV / V, mA / V, etc.). The additional measuring channel

numbers per connector go up in steps of 10 (e.g. the first sensor has channels

M0, M10, M20, M30, the second sensor has channels M1, M11, M21, M31

etc.).

Device-internal channels

A further innovation on this device is its four additional device-internal channels.
The first of these M9 is programmed by default as differential channel M1 – M0.

This only applies, however, if there are two sensors with the same units and
same decimal point position connected at measuring points M0 and M1. How-

ever, all four channels can be programmed with any other function channels
(e.g. U-Bat, cold junction compensation, average, volume flow, etc.); (see Man-

ual 6.3.4). The reference channels used are by default Mb1 = M1 and Mb2 =
M0 but this can be modified (see Manual 6.3.4).

The advantage of device-internal channels is that when using several sensors
for the same application these sensors do not have to be reprogrammed and

20 ALMEMO

®

5690-2M

«
...
18
19
20
21
22
...
»

Содержание ALMEMO 5690-2M





























































































Отзывы:

Нет отзывов

Похожие инструкции для ALMEMO 5690-2M

Бренд: 4iiii Страницы: 3

Бренд: jablotron Страницы: 2

Бренд: Kathrein Страницы: 10

SourceMeter 2400

Бренд: Keithley Страницы: 594

System SourceMeter 2601B

Бренд: Keithley Страницы: 864

Бренд: Labgear Страницы: 8

SourceMeter 2600B Series

Бренд: Keithley Страницы: 897

Бренд: Veeder-Root Страницы: 39

Бренд: Veeder-Root Страницы: 98

Бренд: VECTECH Страницы: 9

Бренд: WAGNER Страницы: 9

Бренд: ICS Schneider Messtechnik Страницы: 40

Бренд: ILX Lightwave Страницы: 126

Бренд: Rae Страницы: 38

Бренд: FlowLine Страницы: 2

KINGFISHER PLUS+

Бренд: semaphore Страницы: 247

Бренд: Feature tech Страницы: 2

Бренд: Bahco Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды