11. Measuring with the measuring menus
11.7 User menus
Looking at the standard measuring menus you might conclude that the display
of measured values and the combination of functions are not always ideally
suited to the requirements of your particular applications. You are provided
therefore not only with the standard measuring menus but also with three user
menus
U1
to
U3
which you can freely configure using the AMR-Control software.
You can choose the functions you require from the following list and arrange
these on the display exactly as you wish; the only restriction is the available
space, namely 13 rows. You can use not only the various measuring functions
already described but also various timers for sequence control (see 12.1) and
most of the sensor programming functions (see 12.3).
11.7.1 Functions
Functions
Display
Keys
Com-
mand
Measured value - small
00: 234.5 °C temperature
ZERO ADJ
o 15
Measured value - medium
3 rows
00: 1234.5 °C
ZERO ADJ
o 16
Measured value - large
7 rows
00:
Temperature
°C
1234
.
5
ZERO ADJ
o 17
Measured value, bar chart
2 rows
|¹¹¹¹¹¹¹¹¹¸¹¹¹¹¹¹¹¹¹¸¹¹¹¹¹¹¹¹¹¸¹¹¹¹¹¹¹¹¹¸¹¹¹¹¹¹¹¹¹|¹¹¹¹¹¹¹¹¹¸¹¹¹¹¹¹®®®¸®®®®®®®®®¸®®®®®®®®®¸®®®®®®®®®|
5.0 S220 mls 15.00
o 34
Limit value - maximum
(s. 12.3.5)
Limit max 1234.5 °C
OFF
ON
o 00
Limit value - minimum
Limit min -0123.4 °C
OFF
ON
o 01
Base value (see 12.3.6)
Base value ------°C
OFF
ON
o 02
Factor
Factor 1.12345
OFF
ON
o 03
Exponent
Exponent
0
OFF
ON
o 48
Zero-point corr.(see 12.3.7)
Zero-point ------°C
OFF
ON
o 04
Gain corr.
Gain ------
OFF
ON
o 05
Analog start (see 12.4.4)
Analog start 0.0 °C
OFF
ON
o 06
Analog end
Analog end 100.0 °C
OFF
ON
o 07
Range (see 12.3.9)
Range NiCr
CLR
o 08
Maximum value (see 11.1.2)
Maximum 1122.3 °C
CLR CLRA
o 09
Minimum value
Minimum 19.3 °C
CLR CLRA
o 10
Average value (see 11.4.5)
Average ------
CLR CLRA
o 11
Cycle (see 12.1.2)
Cycle 00:00:00 Un
CLR FORM
o 12
Time, date (see 12.1.1)
Time:12:34:56 Date:01.02.00
CLR
o 14
Averaging mode (see 11.4.2)
Averaging mode CONT
CLR
o 18
Measuring rate (see 12.1.3)
Meas. rate 10 M/s Cont: -
OFF
ON
o 19
Cycle timer (see 11.3.2)
Cycle timer: 00:00:00 Un
CLR FORM
o 20
Mean number (see 11.4.3)
Number
00000
o 22
50 ALMEMO
®
5690-2M
