Agilent Technologies InfiniiVision DSO6014L, Руководство пользователя

Страница: 153 / 371

152 6000 Series Oscilloscope User’s Guide
4 Triggering the Oscilloscope
To use FlexRay triggering
The N5432A FlexRay triggering and decode option, along with
the DECOMSYS::BUSDOCTOR 2 protocol analyzer and an MSO
communications cable (available from DECOMSYS), allow a
6000 Series mixed-signal oscilloscope to:
• Control the BUSDOCTOR (without a PC).
• Trigger on FlexRay bus frames, times, or errors and correlate
them with other signals in a device under test.
• Display decoded FlexRay bus data.
Eight of the oscilloscope’s 16 digital channels are used for the
BUSDOCTOR connection.
Modes of BUSDOCTOR Control/Operation
The oscilloscope and BUSDOCTOR 2 can be used in one of three
ways:
• Oscilloscope controls BUSDOCTOR, asynchronous mode
monitoring (LAN connection required).
• Oscilloscope controls BUSDOCTOR, synchronous mode
monitoring (LAN connection required).
• PC controls BUSDOCTOR.
When the oscilloscope controls BUSDOCTOR, the system is a
standalone, time-correlated measurement system (no external
PC required).
Oscilloscope Controls BUSDOCTOR, Asynchronous Mode
Monitoring
For asynchronous analysis, you can set the FlexRay channel and
baud rate from the oscilloscope’s BUSDOCTOR Menu.
N O T E
For information on displaying decoded FlexRay bus data, see page 288 .