Agilent Technologies 8752C, Руководство по обслуживанию, Страница: 506 / 510

part numbers, 13-18{25
Sampler Cor ., 10-14
SAMPLER COR ON OFF, 10-23
sampler/mixer, 12-28
2nd LO signal, 12-28
high band, 12-28
low band, 12-28
mixer circuit, 12-29
SA VE F AILED . INSUFFICIENT
MEMORY, 10-62
SEGMENT, 10-6
selector switch check, 5-7
self diagnose softkey, 10-7
self-test, 4-3
SELF TEST #n F AILED, 10-62
sensor (power), 1-3
sequence check for power up, 4-12
Serial Cor ., 10-15
serial number correction constant
(test #55) adjustment, 3-32
service and support options, 1-9
service center procedure, 4-2
service features, 10-19
service key menus, 10-1
service features, 10-19
service key mnemonics, 10-1
service mnemonic denitions, 10-52
SERVICE MODES, 10-20
service modes more menu, 10-23
service oces, 15-2
service test equipment, 1-1
service tools list, 1-1
servicing the analyzer, 4-2
setup
fractional-N spur avoidance and
FM sideband adjustment, 3-55
phase lock error troubleshooting,
7-4
setup check for disk drive, 4-8
setup check for plotter or printer,
4-8
short and open device verication,
9-6
shutdown circuit
post regulator, 12-8
shutdown circuit on A8, 12-8
shutdown circuitry disable, 5-16
signal examination for phase lock,
7-37
signal separation
A30 dual directional coupler, 12-23
built-in test set, 12-23
theory of operation, 12-23
signals required for A10 assembly
operation, 8-9
SLOPE D A C, 10-21
softkeys, 10-2
source
A11 phase lock, 12-15
A12 reference, 12-14
A13 frac-N analog, 12-14
A14 frac-N digital, 12-14
A3 source, 12-15
A7 pulse generator, 12-14
high band theory, 12-19
low band theory, 12-16
part numbers, 13-18{25
source, 12-15
theory of operation, 12-3, 12-14
source and A11 phase lock check,
7-8
source attenuator
theory of operation, 12-3
Source Cor ., 10-14
Source Def., 10-14
source default correction constants
(test #44) adjustment, 3-8
Source Ex., 10-12
source group assemblies, 7-1
source group troubleshooting
appendix, 7-39
source match (E
S
), 11-13
Index-18