AG-BAG LX1214, Руководство оператора

Страница: 71 / 276

3 - CONTROLS AND INSTRUMENTS
Exterior controls
Remote switches
Outside controls — manual
The bag boom and the bag pan can be operated with the
controls on the tunnel side of the machine near the en-
gine or by plugging in a remote control to give you more
mobility.
All of the control levers on the machine are spring loaded
to return to the neutral position when released.
RAIL16GEN0073AA
1
The control levers operate the following functions:
Boom Rotate In or Out: (1) Use this control to rotate the
bag boom into position to properly lift the tunnel extension
into position and to position the bag onto the tunnel.
Boom Up or Down: (2) Lifts the entire boom arm up or
down for positioning of tunnel extension or bag.
Boom Extension Out or In: (3) Use this control to extend
the boom in or out to reach out farther from the tunnel to
position the bag on the tunnel. Be sure the boom winch
is out far enough to allow extension of the boom. If cable
is not out far enough, winch damage can result.
Boom Winch Up or Down: (4) Use this control to lower the
winch cable down to pick up the bag with the bag cradle
and raise up into position. Use also to lift and lower the
tunnel extension into position.
NOTE: The bag boom is designed to be used for posi-
tioning the tunnel extension and to install bags onto the
tunnel.
Bag Pan In or Out:: (5) This control will position the bag
pan in or out as required to properly position the bag into
the pan for bagging.
All of the above controls can also be operated from the
remote control. Refer to “Outside Controls - Remote Con-
trol”. When the remote control is used, the levers on the
valve control bank will move as the remote is activated.
NOTE: When the remote control is activated, the wheel
drive controls inside the cab are locked out.
RAIL16GEN0073AA
2
3-33