Aerotech SOLOIST, Руководство по оборудованию

Страница: 109 / 118

Soloist Hardware Manual Technical Changes
www.aerotech.com C-1
APPENDIX C: TECHNICAL CHANGES
In This Section:

Current Changes...................................................................... C-1

Archive of Changes................................................................. C-2
C.1. Current Changes
Table C-1. Current Changes
Version Section(s) Affected General Information
1.6.
Corrected Input and Output power Specifications in
Table 1-2, in Section 1.6.
2.6.
Added E-STOP noise suppression requirement note
and Table 2-5.
2.10
Added note to remove power before changing
communication channel settings.
3.1.1
Clarified PSO output text in paragraph 2 and updated
Figure 3-1 to show interface to a single-ended device.
3.1.3.
Corrected high-speed input voltage spec. from 5-24 to
5 volts only. Updated Figure 3-6, 3-7 to show 2 inputs
connected.
3.2.
Removed errant
“
Window array
”
reference in Figure
3-11.
4.2.4
Fixed schematic/picture in Figure 4-6 and corrected
text to indicate
“…
these inputs are scaled for 5-24
volt logic
”
. (High-speed inputs in Sec. 3.1.3 are 5 volt
only.)
1.4
6.3
Corrected fuse F4 for the Soloist30 to LittleFuse P.N.
from 2184010 to 218010