Aerotech SOLOIST, Руководство по оборудованию

Страница: 58 / 118

Technical Details Soloist Hardware Manual
3-14 www.aerotech.com
Secondary Encoder
Primary Encoder
Distance Trigger
Inside Window
Tracking
Counter
Pulse
Generator
Tracking
Enable
Pulse
Output
Software
Trigger
Window
+/- and
Enter/Exit
Detection
Count
Trigger
Reset
Switching
Multiplex
Marker
Only
Marker
or
Encoder
PSO Output
Window
Output
High Speed
Input 12
High Speed
Input 13
Data
Capture/Update
Mode
See other
Block Diagram
Switching
Multiplex
Figure 3-11. PSO Block Diagram
The window modes allow firing to occur, or be enabled, based upon axes being within a
user-defined window. The +/- and Enter/Exit Detection block within the block diagram is
used to prevent false triggering due to one bit dither on an axis, etc. Window modes may
not be pre-scaled as indicated in the block diagram.
Data Capture mode allows the encoder position to be captured at the PSO trigger
locations. Data Update mode allows analog or digital outputs to be set by the same
trigger. The capture and update modes are defined in Figure 3-12. For a full description
of these modes, refer to the Soloist HMI help.
Window
Capture
Switching
Multiplexors
Trigger
Primary Encoder, 32- Bit
Secondary Encoder, 32- Bit
PSO Output
High Speed Input 12
High Speed Input 13
From Pulse or
Window
Figure 3-12. Data Capture/Data Update Modes