Aerotech SOLOIST, Руководство по оборудованию

Страница: 66 / 118

Soloist Options Soloist Hardware Manual
4-2 www.aerotech.com
4.2. -IO Option Board
See the following sections for details on the connector Pin-out and technical information
for the -IO options.
Figure 4-1.
–
IO Option Board (690D1611 Rev. 0)
4.2.1. Analog Input 1 (TB201)
Analog input 1 is differential and buffered by a precision unity gain differential AD622
instrumentation amplifier and converted to digital by a 12-bit ADS7816 analog to digital
converter allowing an input voltage in the range of +/- 10 volts. This produces a
resolution of 4.88 millivolts per bit of the A/D. Refer to Figure 4-2. To interface to a
single-ended (non-differential) voltage, ground the negative (-) input and connect your
signal to the positive (+) input. Analog input 0 is available at J104, see section 3.1.5. The
analog input has a 10 Giga-ohm input impedance.
Table 4-2. Optional Analog Input Connector Pin-out (TB201)
Pin # Label Description In/Out/Bi.
1 AGND Analog Common N/A
2 AIN1+ Non-Inverting Analog Input 1 Input
3 AIN1 - Inverting Analog Input 1 Input
Figure 4-2. Optional Analog Input Connector (TB201)