Aerotech SOLOIST, Руководство по оборудованию

Страница: 9 / 118

Soloist Hardware Manual Regulatory Information
www.aerotech.com ix
DECLARATION OF CONFORMITY
Manufacturer
’
s Name and Address
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2897
Declares that the product:
Product Name: Soloist
Conforms to the following product specifications, with the exceptions listed below.
Safety: EN 61010-1:1993 Safety Requirements
and complies with EMC directive 89/336/EEC and 73/23/EEC low voltage directive.
General notes concerning the test setup.
Safety related requirements to ensure compliance:

Soloist must be installed within an enclosure with construction compliant
unlimited circuits.
Pittsburgh, PA
David F. Kincel_________________________
September, 2004 Quality Assurance Manager
Alex Weibel ___________________________
Engineer Verifying Compliance
General notes concerning the test setup.
Safety related requirements to ensure compliance:
Exceptions to EN 61010-1:

Soloist must be installed within an enclosure with construction compliant for
unlimited circuits.

End user is responsible for meeting final protective ground requirements.

AC power disconnect is AC power cord located on front panel of Soloist. End
user is responsible for determining and providing supply disconnect for system.

End user is responsible for preventing unexpected startup.

Connection requirements are described in the technical documentation provided
with the system. End user is responsible for making proper connections and
meeting any required interlock requirements for application.