Aerotech SOLOIST, Руководство по оборудованию

Страница: 15 / 118

Soloist Hardware Manual Introduction
www.aerotech.com 1-5
1.5 Soloist Voltage Configurations
The Soloist is available in three models with continuous power, ranging from 1,100 to
2,300 watts. The available voltage configurations and power options for these models are
shown in Table 1-1.
Table 1-1 Soloist Voltage Configurations
Model Peak Output Current Continuous Output Current (peak)
Soloist10 10A 5A
Soloist20 20A 10A
Soloist30-S 30A 15A
Options
-S Shunt resistor network, standard on Soloist30
-AUXPWR
Auxiliary 115/230 VAC input to power logic circuitry; required for
“
keep alive
”
or 10-40 VDC bus operation. 10-40 VDC operation requires external
transformer to generate 7-28 VAC bus power input.
-IO
I/O option, adds 16 digital opto-inputs, 16 digital opto-outputs, 18-bit analog
output and 16-bit analog input and a brake/relay output.
-LB
Low bus voltage option for 40-100 VDC bus; doesn
’
t support keep-alive
functionality; not available with -AUXPWR option; 40-100 VDC bus operation
requires external transformer to generate 28-70 VAC bus power input
-MXU x512 (total) software encoder resolution multiplication (primary channel only)
-S Shunt option (standard on Soloist30)