AEP Networks ATAG VA4511AT, Руководство пользователя

Страница: 33 / 67

- 33 -
10.2001 A. B. 599 51 21 26 EN
Easytronic plus
1. Press keys T2 and T3 simultaneously and ...
2. ...keep them pressed until the appliance is
switched on by the ON/OFF key T1. The key
LEDs T2, T3 as well as possibly T4* and T5*
will flash to confirm that the service functions
are active.
3. The current set condition is indicated when
actuating key T2. The key LED T2 will flash
and the 7-segment display will indicate the
corresponding value (e.g.”b1”).
4./5. By actuating key T2 once again it is possible
to switch on resp. off the rinse-aid addition
depending on the previous condition.
b1 = buzzer on
b0 = buzzer off
6. The buzzer function is stored immediately
after any input. By switching off the appliance
with the ON/OFF key T1 or after a defined
time (approx. 60 sec), calculated from the
last actuation of key T2, one automatically
leaves the special cycle.
VGA - Easytronic plus
1. Press keys T2 and T3 simultaneously and ...
2. ...keep them pressed until the appliance is
switched on by the ON/OFF key T1. The key
LEDs T2, T3 as well as possibly T4* and T5*
will flash to confirm that the service functions
are active.
3. The current set condition is indicated when
actuating key T2. The key LED T2 will flash.
A flashing “end” LED indicates that the
buzzer is active. The buzzer is switched off,
when this LED does not flash.
4./5. By actuating key T2 once again it is possible
to switch on resp. off the buzzer function
depending on the previous condition.
LED “end” is flashing = buzzer on
LED “end” is off = buzzer off
3. The buzzer function is stored immediately
after any input. By switching off the appliance
with the ON/OFF key T1 or after a defined
time (approx. 60 sec), calculated from the
last actuation of key T2, one automatically
leaves the special cycle.