AEP Networks ATAG VA4511AT, Руководство пользователя

Страница: 55 / 67

- 55 -
10.2001 A. B. 599 51 21 26 EN
11. Service Functions
11.1 Call for the Manufacturing Test Routine
T1
EIN
AU S
T2 T3 T4 T5 T6 T7 T8 T9
EIN
AU S
T1 T4 T7
T2 T5 T8
T3 T6 T9
EIN AUS
T2 T3 T4 T5 T6 T7
- Activate the basic function by keys T1, T2 and T4
- Start the manufacturing test routine by key 4
- First you have to press keys 2 and 4 and keep them pressed until switching on the appliance by the
ON/OFF switch T1.
- The key LEDs 2 and 4 will flash when doing so.
- The service mode is activated.
- Start the manufacturer‘s test routine by actuating key 4.
- The key LED 4 will flash during the whole test cycle run.
- If existing, the cycle run will be indicated analogously to the other washing cycles by means of the
7-segment display or by the cycle run display.
- The cycle run of the test routine has been listed under the point Cycle Technology .
- In case of a power failure, the test routine will be continued immediately after the mains have
returned.
- At the end of the manufacturing test routine, the key LED 4 continues to flash. It is possible to exit
the test routine by opening the door or by switching off the appliance.
Test Routine for Dishwasher with Rotary Slide Drive and Automatic
Easy, Control Electronic 111 573 600 / 111 577 800
LED Phase Function Time
prewash 1 pumping to reset point
2 pumping 15 sec
3 calibrate turbidity sensor to 3.5 V
4 static filling to level
5 static filling 5 sec
6 pumping to reset point
7 pumping 15 sec
intermed. rinse 8 static filling to level
9 static filling 15 sec
10 filling, circulating 2000 1/min 5 sec level monitored
11 filling, circulating 2800 1/min 20 sec level monitored
12 washing, circulating 2800 1/min
fill sprayarms in alternating
operation 30 sec level monitored
13 filling, level monitored,
circulating 2800 1/min, rotary slide to level and upper sprayarm
14 heating, filling, circulating
2800 1/min
to 50 °C or level monitored
for 1200 sec
15 pumping to reset point
16 pumping 30 sec
final rinse 17 regnerating, drying 90 sec
18 pumping to reset point
19 pumping 20 sec