AEP Networks ATAG VA4511AT, Руководство пользователя

Страница: 30 / 67

- 30 -
10.2001 A. B. 599 51 21 26 EN
T1
EIN
AU S
T2 T3 T4 T5 T6 T7 T8 T9
EIN
AU S
T1 T4 T7
T2 T5 T8
T3 T6 T9
EIN AUS
T2 T3 T4 T5
T6 T7
Key layout, vertically
Key layout, horizontally
Key layout, VGA
Set the water softener according to the table to the water
hardness of your residential district:
- The dishwasher must be switched on.
- Mechanical setting:
Open door of dishwasher.
- Remove lower dishwasher basket from the dishwasher.
- Set hardness area switch to 0 or 1.
- Now re-insert lower dishwasher basket.
- Electronic setting:
Press function keys 2 and 3 simultaneously and keep
them pressed.
Press ON/OFF key.
The LED indications of the adjusted function keys are
flashing.
- Press function key 3 again.
o
LED display of function key 3 flashes
o The number of flashing digits corresponds to the set
hardness level. (except: hardness level 0 is
indicated by 10 flashing digits).
o This order of flashing digits is repeated several
times after a pause of 5 seconds.
- Pressing the function key 3 increases the hardness level
by 1. (exception: hardness level 0 will follow after
hardness level 9).
- When the hardness level is set correctly, press the ON/
OFF key. The hardness level is then stored.