AEP Networks ATAG VA4511AT, Руководство пользователя

Страница: 50 / 67

- 50 -
10.2001 A. B. 599 51 21 26 EN
9. Pumping Out
During the wash cycle the water is pumped out at various stages. First the draining water
cleans the filters (16). The filters are open at the bottom which allows any soilage to be
rinsed off sufficiently. There is a non-return valve (20) at the inlet connection to the drain
pump (19). This valve prevents the water running back from the drain hose into the
dishwasher.
9.1 Installation of the Drain Hose
Drain hose connection:
Max. permissible height: 1 metre;
Min. height required 30 cm above floor level.
The drain hose can be extended horizontally to a maximum length of 3 metres, at a height of 85 cm.
Easy Electronic 111 573 600 / 111 577 800
pump steps
after prewash time pressure switch
1 pumping
2 pause 20 sec
3 pumping 15 sec
until reset point “level”
after prewash in the eco program
1 pumping until reset point “level”
pumping normal
1 pumping
2 pause 20 sec
3 pumping 15 sec
4 pumping 30 sec
until reset point “level”
Easytronic Electronic 111 578 100 / 111 578 200
pump steps
after prewash time pressure switch
1 pumping 5 sec
2 pumping
3 pause 20 sec
4 pumping 20 sec
until reset point “level”
after prewash in the eco program
1 pumping 5 sec
2 pumping
until reset point “level”
pumping normal
1 pumping 5 sec
2 pumping
3 pause 20 sec
4 pumping 45 sec
until reset point “level”