AEP Networks ATAG VA4511AT, Руководство пользователя

Страница: 8 / 67

- 8 -
10.2001 A. B. 599 51 21 26 EN
During the rinse cycle, the coil will be switched on when the
rinse is warmed and the rinse-aid runs from compartment
3 into the rinse tank. At the same time, the remaining rinse-
aid (15 %) runs from compartment 1 into compartment 2.
With the coil switched off, the rinse-aid flows from
compartment 2 into compartment 3.
During the rinse cycle, the coil is always switched on twice.
When it is switched on the second time, the remaining
rinse-aid flows into the rinse tank.
Electronic
On electronic models, a micro processor controls all
components, this is done using triacs. The electronic also
memorizes all programme data.
The software is continuously developed further. The later
described software-dependent sections refer to the following
numbers:
Easytronic + 2. software 111 573 600
111 577 800
Easytronic 4. software 111 578 100
111 578 200
These electronics are programmed in the factory and then
receive a service PN number. As spare part you can only get
the current software. Older versions are dropped. The
assignment is determined by replacement notes.
coil on
o f f
time
coil on
o f f
time
coil on
o f f
time