Aeca Tarom MPPT 6000, Инструкция по установке и эксплуатации

Страница: 73 / 92

n
Boost charge starts automatically when the switch-on threshold 1) is reached. Boost charge can
also be started manually.
n Boost charge ends after the specified charging duration.
n
With boost charge the charging voltage is higher than with float charge.
n After boost charge the controller automatically switches to float charge.
Note
Observe the manufacturer's specifications when setting the charge duration and charge comple-
tion voltage.
Operation
n
Switch-on threshold: Main menu
▶
Battery settings
▶
Charge voltages
▶
Boost charging
▶
Starting threshold
n
Charge duration:
Main menu
▶
Battery settings
▶
Expert menu
2)
▶
Boost charge dur.
n
Charge completion voltage: Main menu
▶
Battery settings
▶
Charge voltages
▶
Boost charging
▶
End of charge volt.
n
Starting boost charging manually:
Main menu
▶
Battery settings
▶
Start boost charge
1) Value in
volts when using voltage control
2) More information on this is provided in Ä
Calling up the expert menu for battery settings, p. 26.
9.2.3 Equalise charge
Equalise charging prevents acid layering via controlled gassing and thus extends the service life of
the battery. The following applies in addition:
n Equalise charging starts when the cycle has expired or the switch-on threshold
1)
is crossed.
n
Equalise charging stops after the charge duration has expired or when the switch-off
threshold 1) has been reached, whichever happens first.
n
Equalise charging is switched on in the factory settings. Prerequisite: Battery type =
‘Liquid
electrolyte’ .
Notices
–
Observe the manufacturer's specifications when setting the cycle and charge duration.
–
Equalise charging is only possible when a battery type of ‘Liquid electrolyte’ is set.
Operation
n
Generally switching equalise charging on/off:
Main menu
▶
Battery settings
▶
Equal. charging
▶
Operation mode
n
Cycle: Main menu
▶
Battery settings
▶
Equal. charging
▶
Equal. charge cycle
n
Switch-on threshold:
Main menu
▶
Battery settings
▶
Charge voltages
▶
Equal. charging
▶
Starting threshold
n
Switch-off threshold:
Main menu
▶
Battery settings
▶
Charge voltages
▶
Equal. charging
▶
Disconnection thresh.
n
Battery type: Main menu
▶
Battery settings
▶
Battery type
n
Charge duration:
Main menu
▶
Battery settings
▶
Expert menu
2)
▶
Equal. charge dur.
1) Value in volts when using voltage control
2)
More information on this is provided in Ä
Calling up the expert menu for battery settings, p. 26.
GB
749.126 | M02 | 2013-11-13 29