Aeca Tarom MPPT 6000, Инструкция по установке и эксплуатации

Страница: 67 / 92

7 Connections and operating buttons
The following section describes the connections and operating buttons. For information on the dis-
play and operation see Ä
8, p. 24.
7.1 TEMP temperature sensor connection (
④
in Fig. 1, p. 8)
If the controller and battery are not located in the same room then an external temperature sensor
for measuring the battery temperature must be installed. We recommend using the optionally avail-
able Steca PA TS-S. The polarity of the contacts for the connection is irrelevant.
7.2 PE connection (
④
in Fig. 1, p. 8)
DANGER!
Risk of death by electrocution.. The controller must be grounded via PE (controller has protection
class I).
7.3 Operating keys (
②
in Fig. 1, p. 8)
The operating buttons have the following functions:
Button Function
SET n
jumps down by one menu level
n
changes the state of a control element (check box/radio button)
n
causes the selected numeral to blink so that it can be modified
n
answers a query dialog with
Yes
n
adopts a change
ESC n
jumps up by one menu level
n
jumps to the status display (press for 1 s)
n
answers a query dialog with No
n
discards any changes
r / s
n
moves the selection bar or the display content upwards/downwards
n
moves the selection 1 position to the left/right on a settings page
n
increases/reduces the setting value by 1 step
n
repeated button presses: press button for a longer time
GB
749.126 | M02 | 2013-11-13 23