1
General information
1.1 General safety instructions
n
This document is part of the product.
n
Only technical professionals may perform the work described in this manual.
n
Install and use the device only after reading and understanding this document.
n
Always perform the measures described in this document in the sequence specified.
n
Keep this document in a safe place for the entire service life of the device. Pass the document
on to subsequent owners and operators of the device.
n
Incorrect operation can reduce solar system yields or damage system components.
n
The device must not be connected to the DC cables if it has a damaged casing.
n
If one of the following components is damaged immediately take the device out of operation
and disconnect it from the battery and modules.
–
Device (not functioning, visible damage, smoke, penetration of liquid etc.),
–
Connected cables,
–
Solar module.
Do not switch the system on again before
–
the device has been repaired by a dealer or the manufacturer,
–
damaged cables or solar modules have been repaired by a technical specialist.
n
Battery acid splashes on skin or clothing should be immediately treated with soap suds and
rinsed with plenty of water. Immediately seek medical advice in the case of injuries.
n
If battery acid splashes into the eyes, immediately rinse with plenty of water and seek medical
advice.
n
Never cover the device.
n
Do not open the casing: Risk of death. Invalidation of the guarantee. Only the terminal cover
may be removed by a technical professional for installation or repair purposes.
n
Do not operate the device without the terminal cover installed. Risk of death!
n
Factory labels and markings must never be altered, removed or rendered unreadable.
n
Observe the manufacturer's manual when connecting an external device that is not described in
this document. Incorrectly connected devices can damage the controller.
n
This device is not intended for
–
children,
–
persons with physical, sensory or mental impairment,
–
persons without sufficient experience or knowledge unless they are instructed in the use of
the device, and initially supervised, by a person responsible for their safety.
1.2 Identification
General information
Feature
Description
Type
MPPT 6000
Issue version of the manual
M02
Certificates
See Appendix
⇒
Certificates and
www.stecasolar.com
⇒
PV OFF-GRID SYSTEMS
⇒
Solar
charge controllers
⇒
MPPT 6000
Optional accessories
External temperature sensor Steca PA TS-S
GB
749.126 | M02 | 2013-11-13
4
Содержание Tarom MPPT 6000
