R3132 Series Spectrum Analyzer Operation Manual
2.4.2 Saving or Recalling Data
2-107
2.4.2
Saving or Recalling Data
(1)
Saving Data
Data which can be saved to internal memory or to a floppy disk includes the following:
•
measurement conditions
•
Trace data
NOTE:
Only the trace data on the screen is saved. For example, if traces A and B are displayed, both of
them are saved.
•
Antenna correction data
•
Normalize data
•
Limit line data
•
The level values for trace data
•
Channel table data
•
Spurious measurement table data
•
Loss:Freq table data
To save data, use the following procedure:
1.
Press SHIFT and RECALL(SAVE).
The Save menu and the file list are displayed.The file list can be scrolled up or
down one page at a time using the step keys.
2.
Press Device RAM/FD.
This selects either RAM (internal memory) or FD (floppy disk) as the file desti-
nation.
NOTE:
FD cannot be selected if a floppy disk is not present in the floppy disk drive.
