Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 57

Страница: 57 / 81

Mechanical installation

Advantech-DLoG

DLT-V4108 Manual, V01 Prelim

57 / 81

14.3.

Connecting external devices/accessories to the DLT-V4108

The DLT-V4108 must be disconnected from the power supply:

−

before external devices (e.g. scanner, keyboard) are connected or disconnected.

−

and before the DLT-V4108 is connected to a network.

NOTICE: Physical damage

Observe the following when connecting/removing external devices:

−

Only use accessories that have been tested and approved by Advantech-DLoG for the

DLT-V4108.

−

The DLT-V4108 may not be connected to the power supply if external devices are being

connected/removed (not applicable for USB devices). Otherwise considerable damage could

be caused to both the DLT-V4108 and the peripheral devices.

−

Make sure that peripherals with their own power supply are either switched on at the same

time as the DLT-V4108 or after the start of the DLT-V4108.

−

Otherwise, you must ensure that a backflow from the external device to the DLT-V4108

cannot take place.

−

Only power up the DLT-V4108 when all devices have been connected and the DLT-V4108

has been closed correctly (remember the cable cover!). Otherwise, you may damage the

DLT-V4108.

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды