Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 12

Страница: 12 / 81

Storage

12 / 81

DLT-V4108 Manual, V01 Prelim

Advantech-DLoG

Storage

WARNING

Personal injury from integrated UPS battery pack: Short-circuit, fire, chemical burns,

toxic substances.

−

Handle and store the DLT-V4108 with integrated UPS battery pack carefully; do not

damage; do not drill through and do not crush or drop.

−

Store segregated, separate from acids and other materials.

−

Store in a cool, dry place, comply with the specified environmental conditions for storage.

−

Provide for sufficient ventilation of the storage location.

−

Do not allow water or other liquids to come into contact with the device (exercise particular

caution with corrosive liquids).

−

Do not store the device near sources of heat or fire, open flames or heaters.

−

Do not allow it to come into contact with fire.

−

Have suitable fire extinguishers ready (foam or powder) in accordance with safety

regulations.

Prevent physical damage due to deep discharge

Storing the DLT-V4108 incorrectly will cause the integrated battery pack to discharge completely

(deep discharge) and thus damage them irreparably.

−

Place the DLT-V4108 into operation within 3 (three) months after receiving it.

−

Charge the integrated battery packs by connecting the DLT-V4108 to the power supply.

−

If you are not placing the DLT-V4108 into operation within 6 (six) months, make sure you

charge it intermediately.

Protecting touchscreens from damage

−

Protect touchscreens from sharp edges, impacts, and heavy objects.

−

If stacking, do not stack higher than four devices.

−

Place devices front-to-front in this case. The VESA mounting point on the rear side of the

device can damage the touchscreen of another device.

−

Use protective material (non-flammable!) between the devices as a precaution.

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды